BURNT IRON ALC121High quality metallic paint perfect to accurately obtain the typical metallic appearance of Burnt Iron finish. Similar strength to lacquer/cellulose automotive paints. This color is airbrush ready, no thinning necessary. Spray at 12-15psi and from a distance of 2-3 inches from the surface in several light misted coats.
The surfaces to be painted must be thoroughly clean and free from dust, grease, oil and finger prints.
Avoid prolonged breathing of vapors and ensure adequate ventilation.
Apply a primer before use. Primers should be lightly polished with 1000/1200 wet & dry paper to give a less absorbent smooth surface. Clean airbrush with A.MIG-8200 (307 Lacquer thinner and cleaner).
Hazard Statements: Causes skin irritation
Causes serious eye irritation
Suspected of damaging fertility or the unborn child
May cause respiratory irritation. May cause drowsiness or dizziness
May cause damage to organs through prolonged or repeated exposure
May be fatal if swallowed and enters airways
Extremely flammable liquid and vapor Precautionary Statements: Do not handle until all safety precautions have been read and understood
Use personal protective equipment as required
Use only outdoors or in a well-ventilated area
Do not breathe dust/fume/gas/mist/vapors/spray
Keep away from heat/sparks/open flames/hot surfaces. - No smoking
Keep container tightly closed
Wear eye/face protection
IF exposed or concerned: Get medical advice/attention
Specific treatment (see supplemental first aid instructions on this label)
Age recommendation: 14+